FO 12

Κωδικός Προϊόντος: 1.001.039 BL

Διαθεσιμότητα: Διαθέσιμο

Περιγραφή

In this newly fine-tuned speaker system, the proven standard format with a 12″ low-frequency woofer and a high-resolution 1″ high-frequency driver, provides the ideal compromise between achievable sound pressure and low colouration in the reproduction of all types of music and speech. The BEM-optimized constant directivity horn with the powerful 1″ compression driver comes from the CONTOUR X series, which was developed for the rough and tumble of touring. With a dispersion angle of 80° x 60° and the ability to rotate 90°, it always delivers the optimum dispersion pattern whether it is used horizontally or vertically. In combination with subwoofers such as the S118 or S218, the result is a very powerful system that can reproduce modern music styles at a high level without any restrictions. The FO 12 can also be used for larger venues, provided that further-away areas of the room are boosted with delay speakers (e.g. with the FO 5, which can be installed unobtrusively).

Concept	Passive 2-way mid/high unit
Cabinet principle	Bass reflex
Power handling RMS	400 W
Power handling program	800 W
Power handling peak	1600 W
Nominal impedance (According to EN 60268-5 (minimum value not less than 80% of nominal value))	8 ohms
Max. SPL average (1 m, 10 % THD @ 80 Hz - 20 kHz, (EN 60268-21), full space)	121 dB
Max. SPL peak (1 m, 10 % THD @ 1.2 kHz, full space)	126 dB
Sensitivity 1 W/1 m (80 Hz - 20 kHz, full space)	94 dB
Crossover frequency	2.6 kHz
Frequency range -6 dB	70 Hz - 20 kHz
Frequency range -10 dB	65 Hz - 20 kHz
Dispersion angle -6 dB (horizontal x vertical)	80° x 60°

Certifications
Ball impact resistance (DIN 18032-3)	certified (MPA University Stuttgart)
IP protection class (EN 60529)	not specified

Components
Low-/mid frequency	1x 12" Sica cone speaker with ferrite magnet and 2" voice coil
High frequency	1 x 1" Sica compression driver with ferrite magnet and 1" voice coil
Crossover	High pass: 18 dB/octave, low pass: 12 dB/octave
High frequency protection circuit	Self-healing PTC fuse
Horn	BEM-optimized constant directivity horn, rotatable

Connections
Input	1 x NL4 Speakon
Output/parallel output	1 x NL4 Speakon
Pin assignment	1+/- (input/parallel output), 2+/- (wired through)

Amping/DSP Presets
Lab.Gruppen	IPX
LEA Professional	Sharkware

Amping/Filter Sheets
Filter specifications in tabular form for frequency response equalization Without limiter specifications	Biamp Tesira BSS Lab.gruppen Lake Linea Research Marani Powersoft QSC Q-SYS Symetrix

Mechanical data
Mounting points	2 x M8 lateral, 2 x M8 bottom/lid, 1 x M8 rear, 4 x M6 rear
Cabinet material	MDF
Cabinet surface	1-component acrylic enamel
Color	Jet black (RAL 9005), signal white (RAL 9003) or special color according to catalog
Front grille	Steel front grille with anticorrosive coating, backed acoustic foam and additional steel reinforcements
Optional accessories	U-bracket, screw-on flange SF-35, swivel and tilt wall mount (size L for VESA MIS-E, 200 x 200 mm), AP-8
Rear hole pattern	VESA MIS-E (200 x 200 mm)
Dimensions (WxHxD)	356 x 580 x 369 mm 14.02 x 22.83 x 14.53 inch
Weight	17.5 kg 38.58 Ibs

Οι τιμές δεν περιλαμβάνουν ΦΠΑ.

FO 12

Γράψτε μια αξιολόγηση