eMPAGE 16-zone | 20-key | e-ink display | RJ45

Κωδικός Προϊόντος: 1.045.152
Διαθεσιμότητα: Μη διαθέσιμο
eMPAGE 16-zone | 20-key | e-ink display | RJ45

eMPAGE is a digital paging station (MPAGE16's evolution), compatible with HUB, MIMO88, MIMO88SG and MIMO1212SG digital matrixes. Includes: a gooseneck cardioid microphone (removable); 16 zone-selection keys; ALL, CLEAR and PAGE keys; 2 programmable keys, F1 & F2, for zone-group selection. Text labelling for destination areas by means of programmable electronic ink display.

20 mechanical keys with integrated LED status indicator (paging zone selection management)

1 mechanical key with adjacent LED indicator (message activation, PAGE key)

Electronic ink display (shows paging zone names)

Gooseneck microphone, with standard XLR connector

Management of up to 16 paging zones

RJ45 connector for single CAT5 or higher cabling (point-to-point), including power, audio output signal (picked up by the microphone) and digital control bus between the HUB unit and the eMPAGE station

Connector for backup power supply (optional)

Two eMPAGE units, with different or equal priority levels, can work simultaneously on the same HUB zoner

Programming of paging station(s) functionality from the web application embedded in the HUB: enabled paging zones, chime melodies, priorities, programmable keys, etc.

 

Number of output channels

1 (picked up by the microphone)

Number of paging zones

16

Microphone type

Removable gooseneck condenser microphone (eMCN1)

Polar pattern

Unidirectional

Frequency response

50Hz – 18KHz (-10dB)

Phantom power

48VDC, always ON

Input connection type

XLR female conection type

Resolution

296x128 Pixels

Display

Active Matrix Electrophoretic Display

Touch-panel

No

LED indicators

Green LED on All and Clear keys, Bicolor LED on other keys

Buttons

Paging zone selection keys, PAGE key, F1, F2, All & Clear keys

Ethernet

1 RJ45 connector, cable: Cat-5 or better. Supports PoE

Programing and control

RS485 and CAN, internally selectable by JUMPER

Power supply

Optional, 24VDC (min. 80mA)
Recommended external power supply: Ecler WP24-PSU

PoE

Yes

AC mains requirement

From RJ45 remote input: 12VDC
From External Input: 24VDC (With WP24-PSU backup power supply)

Max power consumption

From RJ45 remote input: 180mA
From External Input: 180mA

Type

Paging station

Installation options

Desktop

Operating temperature

Min: -10°C ; 14°F
Max: 40°C ; 104°F

Operating humidity

<85% HR

Storage temperature

Min: -10°C ; 14°F
Max: 40°C ; 104°F

Storage humidity

<90% HR

Included accessories

Windscreen for Microphone, jumper for internal connection and RJ45 to Euroblock adapter

Dimensions

150 x 50 x 180 mm / 5.91 x 1.97 x 7.09 in. (WxHxD) (microphone excluded)

Weight

0.9 kg / 1.98 lb

Γράψτε μια αξιολόγηση

Παρακαλώ συνδεθείτε ή δημιουργήστε λογαριασμό για να αξιολογήσετε

Οι τιμές δεν περιλαμβάνουν ΦΠΑ.